 PRODUCT
RANGE |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Home »
Products » Low Intensity Neon Obstruction Warning Light
» Low Intensity Neon Obstruction Warning Light
We offer a range of highly energy
efficient Neon Obstruction Lights to mark high rise buildings, bridges,
towers etc. The light uses cold cathode to produce low intensity
incandescent light. These lights are low in maintenance and are best
suited for high vibration area.
|
We offer
customized products developed as per
your requirements and specifications.
Please send us an
enquiry
detailing your requirements for a quick response. |
The rapid growth of the
cellular phone industry and other communication services will lead up to
millions of new communication towers all over the Globe. These towers
present hazards to flight paths of aircrafts, so these towers should be
marked with obstruction lights to make sky safer to fly. "Technovators"
Tower Marking Low Intensity Obstruction Lights are compact, sturdy,
power saving LED low intensity lights, available with optional advanced
features
The Neon spiral lamp is operated through electronic power supply which
is housed inside the metallic enclosure of the light. Specially designed
copper R.F. Screen is provided to shield the lamp against emission of
R.F. Two lamps can be individually connected through the failure sensing
changeover card located in the control cabinet. The changeover of power
from service lamp to standby lamp takes place automatically, in the
event of failure of service lamp.
 |
- ICAO (Type A & B) compliant product design and
performance
- Omni directional RED Neon light source (10 cd - 32 cd)) hence
no requirement of filters that fade quickly
- Customizable for both AC and DC conditions
- High quality optics for excellent beam spread control.
- Light weight sturdy casings (of high quality die-cast
aluminum)
- All hardware of Tower marker obstruction lights are made of
corrosion resistant metals.
Excellent dust and moisture sealing through improved
gaskets
Features :
- ICAO (Low Intensity Type 'A' & 'B' compliant product
design and performance.
- Omni-directional RED light source hence no requirement of
filters.
- Borosilicate glass dome.
- Aluminium Alloy housing.
- Excellent dust and moisture sealing.
- Wide operating temperature range (-20 ºC to +55 ºC)
|
» Technical
Specifications Operating Conditions
- Will withstand wind in excess of 150 mph (240 kph), (150 knots)
- Fog, Rain
- Humidity :90%
- Electromagnetic Interference Shielded
- Radio Frequency Interference Shielded
|
Photometric Data |
|
Night Mode |
Red |
|
Horizontal Coverage |
360 ° |
|
Flash Rate |
Stationery Mode |
|
Electrical Specifications |
|
Input Supply |
System Operating on DC Volts |
Current (Amp) |
|
Min. |
Max. |
|
12V DC |
1800 V |
0.75A |
1.5A |
|
230V AC |
1800 V |
0.75A |
12V DC |
|
Light Characteristics |
|
ICAO Type |
Type "A" |
|
Light Source |
Neon Lamp |
|
Light Color |
RED |
|
Intensity |
10 to 32 cd |
|
Horizontal Divergence |
360 ° |
|
Lamp Life |
20,000 hrs approx. |
|
Radial Emission |
As per CISPR 11 |
|
Construction |
|
Lens Material |
Borosilicate Glass |
|
Sealing |
Silicon Sealant |
|
Weight |
1.250 Kg Approx. |
|
Environmental and Electrical |
|
Temperature Range |
- 40 ° C to + 50 ° C |
|
Waterproof |
Through EPDM Gasket and Sealant |
|
Environment Protection Standard for Light |
IP 65 Standard |
|
Environment Protection Standard for Control
Panel |
IP 55 Standard |
» Shipping
Specifications Shipping details for solar
powered obstruction lights
| Carton No. |
Carton Description |
Net Weight (KG) |
Gross Weight (KG) |
Dimn. |
Vol. CBM |
| 1 |
Neon Lamp |
|
|
|
|
| 2 |
Solar Module |
8 |
12 |
755 x 645 x 190 |
0.092 |
| 3 |
Battery with Charge Controller |
50 |
65 |
|
|
| 4 |
Mounting |
32 |
38 |
|
|
| 5 |
Cable |
4 |
5 |
|
|
|
We offer
customized products developed as per
your requirements and specifications.
Please send us an
enquiry
detailing your requirements for a quick response. |
|
