 PRODUCT
RANGE |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Home »
Products » Medium Intensity Obstruction Warning Light
» Medium Intensity Obstruction Warning Light
Our Led - Medium Intensity
flashing lights are perfect for protection from aviation hazards in tall
buildings such as Communication Towers, Broadcast Antenna, Electricity
Transmission and Distribution Towers, Chimneys, Bridges, Wind Turbines
and more. Our lights comply with ICAO, Annexure-14 type 'B' and have an
exceptionally long service life.
|
We offer
customized products developed as per
your requirements and specifications.
Please send us an
enquiry
detailing your requirements for a quick response. |
TECHNOVATORS" Long
life solution for marking of tall structures.
 |
- It is an Omni-Directional light which conforms to ICAO,
Annexure-14 type 'B'.
- The high power high flux solid state lamps give an
exceptionally long life of more than 50,000 burning hours.
- It combines the most modern concept of surface mounting solid
state lamps Technology (High powered Lighting Diodes) from most
reputed world source.
- The system is highly energy efficient, which makes it very
suitable for Solar powered system.
- The Lamps are mounted on very Durable Epoxy masked PCB's
which enables easy replacement in case of failure.
- Efficient secondary optics is induced to generate Lens effect
for proper light beam in horizontal plane and arrest unnecessary
light dispersion in vertical plane as required by the lights
specifications.
- High quality Aviation Red colour is directly emitted by the
lamps thus eliminating the need for additional colour filters,
which otherwise get faded due to UV radiation of sun.
- Efficient circuit designing reduces chances of total light
blackout.
- The light housing is made from high grade Aluminium Alloy
with protective painting.
- Hardware is made from Corrosion resistant metals.
- The light is protected from ingress of Dust and Moisture.
- Bird Spike is provided at the top to protect the luminaire
from bird droppings.
- Very high quality copper conductor earthing connection is
provided to divert any lightening surges.
- Solid state Electronic Flasher is housed in seperate weather
protected enclosure.
- Solid state Electronic Flasher is housed in seperate weather
protected enclosure.
- Dusk to Dawn operation is enabled through Photo sensor or
Electronic timer.
|
The Medium Intensity
Obstruction Lights are designed for durability with a high grade
Aluminum Alloy with protective painting, stainless steel hardware. High
Quality and latest LED'S available in the world are used for higher
Intensity of light.
Hardware is made of Corrosion resistant metals.
- The light is protected from ingress of Dust and Moisture.
- Bird Spike is provided at the top to protect the Aviation Light
from bird droppings.
- Very high quality copper conductor earthing connection is
provided to divert any lightening surges.
- Solid state Electronic Flasher is housed in separate weather
protected enclosure.
- Dusk to Dawn operation is enabled through Photo sensor or
Electronic timer.
- Our medium intensity obstruction lights have the following Advantages:
- High reliability and superior design
- Controls on the ground / Remote Control
- Less maintenance and ease of installation
- Advanced power supply technology
- High Quality and latest LED'S are used for higher Intensity of
Light
- Minimum Power Consumption
- Ease of repair
- Avaids Technovators is an ICAO certified medium intensity
obstruction lights manufacturers having facility in accordance with
ICAO, Annexure-14 type 'B'.
A dedicated qualified Quality
Department checks the quality of products at all the levels of
manufacturing from incoming component check to the burning test of the
lights.
All the Procedures in avaids are maintained through ERP system.
» Technical
Specifications Operating Conditions
- Temperatures ranging from -50°F to +75°F (-10°C to
+23.88°C).
- Will withstand wind in excess of 150 mph (240 kph), (150 knots)
- Fog, Rain
- Humidity : 80%
- Does not create Electromagnetic Interference
- Does not create Radio Frequency Interference
|
Photometric Data |
|
Night Mode |
Red |
|
Vertical Beam Spread |
> 3 ° |
|
Horizontal Coverage |
360 ° |
|
"Ground Scatter Light" cut-off angle |
< 3% light output at -5° vertical |
|
Flash Rate |
20 - 60 FPM |
|
Electrical Specifications |
|
Input Supply |
Operating Voltage |
System Operating on DC Volts |
Current (Amp) |
Volt Amps (VA) |
Watts
(V x I) |
|
Min |
Max |
Min |
Max |
Min |
Max |
|
220V AC with SMPS Supply |
175 V
AC |
275 V
AC |
12 V |
8 |
10 |
96 |
120 |
120 |
| 24 V |
4 |
5 |
96 |
120 |
120 |
| 48 V |
2 |
2.5 |
96 |
120 |
120 |
|
220VAC (50Hz) |
175 V
AC |
275 V
AC |
12 V |
8 |
10 |
96 |
120 |
120 |
| 24 V |
4 |
5 |
96 |
120 |
120 |
| 48 V |
2 |
2.5 |
96 |
120 |
120 |
|
Light Characteristics |
|
ICAO Type |
Type "B/C" |
|
Light Source |
LED Cluster |
|
Light Color |
RED |
|
Intensity |
> -2000 cd |
|
Horizontal Divergence |
360 ° |
|
Lamp Life |
> 1,00,000 hrs |
|
Radial Emission |
As per CISPR 11 |
|
Physical Characteristics |
|
Mounting |
Hot Dip Galvanized Structure |
|
Operation |
|
Color Technology of LED |
Red Light Emitting Diode |
|
Environmental and Electrical |
|
Temperature Range |
- 20 ° C to + 50 ° C |
|
Waterproof |
Through EPDM Gasket and Sealant |
|
Environment Protection Standard for Light |
IP 65 Standard |
|
Environment Protection Standard for Control
Panel |
IP 55 Standard |
 |
 |
|
Obstruction Warning
Light Dimension |
Obstruction Warning
Light Mounting Detail |
» Shipping
Specifications Shipping details for LED medium
intensity obstruction lights.
| Carton No. |
Carton Description |
Net Weight (KG) |
Gross Weight (KG) |
Dimn. |
Vol. CBM |
| 1 |
TASS-MI-XLL |
16.4 |
21.8 |
440x445x365 |
0.124 |
| 2 |
Control Panel |
12 |
18 |
550x465x255 |
0.065 |
|
We offer
customized products developed as per
your requirements and specifications.
Please send us an
enquiry
detailing your requirements for a quick response. |
|
